با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
دسته بندی:
برق الکترونیک - Power Electronics
سال انتشار:
2017
ترجمه فارسی عنوان مقاله:
حفاظت ریزشبکه مبتنی بر جریان توالی تطبیقی برآیند : یک روش جدید
عنوان انگلیسی مقاله:
Superimposed Adaptive Sequence Current Based Microgrid Protection: A New Technique
منبع:
IEEE Transactions on Power Delivery ( Volume: 32, Issue: 2, April 2017 )
نویسنده:
Harikrishna Muda, Student member, IEEE, and Premalata Jena, Member, IEEE
چکیده انگلیسی:
In this paper, an adaptive directional overcurrent
relaying technique based on the positive-sequence (PSQ) and
negative-sequence (NSQ) superimposed currents is proposed for
microgrid protection. Due to the change in mode of operation of
microgrid, the level and direction of prefault current are altered.
On occurrence of a fault in any line section of the microgrid,
coordination between the primary and backup overcurrent relays
is lost due to variations in level and direction of fault current.
With inception of faults, the current contributed by the inverter
based distributed energy resource (IBDER) is in the range of 2
p.u. To solve protection coordination issue, this paper presents an
adaptive overcurrent relay settings using PSQ and NSQ
superimposed currents those are contributed during fault
conditions. Further, the direction of the fault is obtained using
the new phase change between prefault and superimposed
sequence fault currents. The proposed technique is implemented
on a dSPACE processor board, which is connected to a RealTime Digital Simulator (RTDS) to carry out the hardware-in-theloop (HIL) test. Extensive simulation and hardware results
obtained for several microgrid operating modes indicate the
effectiveness of the proposed technique. This proposed approach
is independent of the voltage information.
Index Terms: Distributed energy resources (DERs) | dSPACE processor | microgrid protection | mode of operation | real-time digital simulator (RTDS) | superimposed sequence components.
چکیده فارسی:
در این مقاله، یک روش رله گذاری اضافه جریان جهتدار تطبیقی مبتنی بر جریان های برآیند توالی مثبت (PSQ) و توالی منفی (NSQ) برای حفاظت از ریزشبکه پیشنهاد می شود. به دلیل تغییر در مُد عملیاتی ریزشبکه، سطح و جهت جریان خطا تغییر می کند. در صورت وقوع خطا در هر قطعه از خط ریزشبکه، هماهنگی بین رله های اولیه و پشتیبان اضافه جریان به خاطر تغییرات در سطح و جهت جریان خطا از بین می رود. با آغاز خطا، جریان تأمین شده توسط منبع انرژی توزیع شده ی مبتنی بر اینورتر (IBDER) در گستره ی 2 پریونیت است. برای حل مسأله ی هماهنگی حفاظتی، این مقاله تنظیمات رله ی اضافه جریان تطبیقی با استفاده از جریان های برآیند PSQ و NSQ را ارائه می دهد که طی رخداد خطا به وجود می آیند. افزون بر این، جهت خطا با استفاده از تغییر فاز جدید بین جریان های خطای توالی پیش از وقوع خطا و برآیند به دست می آید. روش پیشنهادی بر روی یک بورد پردازنده ی dSPACE پیاده سازی می شود که به شبیه سازی دیجیتال لحظه ای (RTDS) متصل است تا آزمون سخت افزار در حلقه (HIL) را انجام دهد. شبیه سازی های گسترده و نتایج سخت افزاری به دست آمده برای چندین مُد عملیاتی ریزشبکه بیانگر اثربخشی روش پیشنهادی است. این روش پیشنهادی، مستقل از اطلاعات ولتاژ است. کلیدواژه ها: منابع انرژی توزیع شده (DER ها) | پردازنده ی dSPACE | حفاظت ریزشبکه | شبیه ساز دیجیتال لحظه¬ای (RTDS) | مؤلفه های توالی برآیند.
حجم فایل: 1125 کیلوبایت
قیمت: 43680 تومان
توضیحات اضافی:
تعداد نظرات : 0