با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
دسته بندی:
متالوژی - Metallurgy
سال انتشار:
2014
ترجمه فارسی عنوان مقاله:
تأثیرناهمسانگردی آلیاژهای -Snβ روی نفوذ مس تحت گرادیان دمایی
عنوان انگلیسی مقاله:
Effects of anisotropic b-Sn alloys on Cu diffusion under a temperature gradient
منبع:
Sciencedirect - Elsevier - Acta Materialia 81 (2014) 141–150
نویسنده:
Wei-Neng Hsu, Fan-Yi Ouyang
چکیده انگلیسی:
The diffusion mechanism of Cu in a thin layer of Sn–3.5Ag sandwiched between two Cu foils was systematically investigated under a
temperature gradient of 2200 C cm1. Experimental observation and theoretical derivation reveal that the microstructural evolutions
induced by thermomigration are significantly affected by the tetragonal anisotropy of Sn. The thermomigration flux of Cu increased with
the squared value of cos a, the angle between the c-axis of the Sn grain and the temperature gradient. When the c-axis of the Sn grain was
parallel to the temperature gradient, a larger thermomigration flux of Cu was induced and the Cu atoms migrated from the hot end
toward the cold end. This tended to form a prominent asymmetrical microstructure and cause failure: serious dissolution of intermetallic
compounds (IMCs) and excessive consumption of Cu foil occurred at the hot end whereas abnormal accumulation of IMCs was
observed at the cold end. Instead, when they are perpendicular, thermomigration would be mitigated due to the lower induced flux.
No failure or symmetrical growth of IMCs was found at either interface.
2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Keywords: Thermomigration | Lead-free solder | Under bump metallization | Sn grain orientation | Intermetallic compound
چکیده فارسی:
مکانیزم نفوذ مس در لایه نازک از مس 3.5 نقره، بین دو ورقه فلزی مس قرار داده شد و مرتبا تحت افت دمایی از 2200درجه سیلیسیوس بررسی شد. مشاهده تجربی و استخراج نظری معلوم کرد که میکرو ساختار تغییر شکل به وسیله گرمای انتقال القا شد و به صورت قابل توجهی بر چهار گوشه ناهمسانگرد از مس تأثیر گذاشت.شار گرمای انتقال با مقدارمربع cosα، زاویه بین محورC از دانه قلع و افت دمایی افزایش یافت.وقتی که محورCاز دانه قلع با گرادیان دمایی موازی بود،شار گرما انتقال مس القا شده بود و اتم های مس از نوک گرم بطرف نوک سرد انتقال یافتند. این تمایل داشتن به میکرو ساختارنامتقارن حساس و باعث نقص انحلال سخت ترکیبات بین فلزی و مصرف اضافی ورق مس در نوک گرم اتفاق افتاد در حالیکه تراکم غیر عادی ترکیبات بین فلزی در نوک سرد مشاهده شده بود.در عوض،وقتی که آنها عمودی هستند،گرمای انتقال به دلیل شار القا شده کمترسبک شده بود،نقص یا رشد متقارن ترکیبات بین فلزی در هر یک از فصل مشترک ها پیدا نشد.
کلیدواژه ها: مهاجرت حرارتی | لحیم کاری رأس آزاد | فلزکاری تحت ضربه | جهت گیری دانه ای قلع | ترکیب بین فلزی
حجم فایل: 4960 کیلوبایت
قیمت: 32400 تومان
توضیحات اضافی:
تعداد نظرات : 0