با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
دسته بندی:
عمران - بتن - Civil Engineering - Concrete
سال انتشار:
2017
ترجمه فارسی عنوان مقاله:
اثرات افزودنیهای جدید پلیمری کاهنده انقباض روی تغییرشکل خودبخودی خمیرهای سیمان
عنوان انگلیسی مقاله:
Effects of novel polymer-type shrinkage-reducing admixture on early age autogenous deformation of cement pastes
منبع:
Sciencedirect - Elsevier - Cement and Concrete Research 100 (2017) 413–422
نویسنده:
Wenqiang Zuoa,b,c, Pan Fenga,⁎, Peihua Zhonga,b,c, Qian Tianb,c, Nanxiao Gaob,c, Yujiang Wanga,b,c, Cheng Yub,c, Changwen Miaoa,b,c
چکیده انگلیسی:
This study aims to investigate the autogenous shrinkage-reducing mechanisms of the novel polymer-type
shrinkage-reducing admixture (SRA) with water-reducing function. For comparison, the traditional polyethertype SRA was also used. The development of autogenous deformation, hydration rate, internal relative humidity
(RH), electrical resistivity, ions and SRAs concentration in pore solutions and crystal content of cement pastes
were comprehensively investigated. Unlike the polyether-type SRA mixture which has an expansion period at
early age, a relatively slow and monotonous evolution of shrinkage was observed for the polymer-type SRA
mixture. It is concluded that the delay and regulation effects on cement hydration of the novel SRA obviously
influence the microstructure development and the evolutions of various performances of cement pastes comparing to the polyether-type SRA. Furthermore, both the self-desiccation status induced capillary pressure and
the crystallization pressure induced expansion stress contribute to the shrinkage-reducing behaviors of SRAs on
the autogenous deformation of the cement pastes.
Keywords: Admixture (D) | Shrinkage (C) | Pore solution (B) | Hydration (A) | Hydration products (B)
چکیده فارسی:
هدف این تحقیق بررسی مکانیزمهای خودبخودی کاهش انقباض در افزودنیهای پلیمریِ کاهنده انقباض (SRA) و دارای قابلیت کاهش آب است. برای مقایسه از SRA سنتی از نوع پلیاتری استفاده شد. در این تحقیق، ایجاد تغییرشکل خودبخودی، سرعت هیدراسیون، رطوبت نسبی (RH) درونی، مقاومت الکتریکی، غلظت یونها و افزودنیهای پلیمری کاهنده انقباض در محلولهای حفره و بخش بلوری خمیرهای سیمان بطور کامل بررسی شد. برخلاف مخلوط SRA پلیاتری که در سنین اولیه دارای یک بازه انبساطی است، در مخلوط SRA پلیمری سیر تکاملی نسبتاً کند و یکنواخت انقباض مشاهده شد. در نهایت نتیجهگیری شد که تأخیر و تنظیم هیدراسیون سیمان در مخلوط SRA جدید در مقایسه با مخلوط پلیاتری تأثیر واضحی روی تشکیل ریزساختار خمیر و سیرهای تکاملی متفاوت عملکرد خمیرهای سیمان دارد. علاوه بر این، فشار موئینگی ناشی از خودخشکشوندگی خمیر سیمان و تنش انبساطی ناشی از فشار تبلور روی چگونگی کاهش انقباض مخلوطها در تغییرشکل خودبخودی خمیرهای سیمان تأثیر میگذارد.
کلیدواژهها: افزودنی (D) | انقباض (C) | محلول حفره (B) | هیدراسیون (A) | فرآوردههای هیدراسیون (B)
حجم فایل: 1509 کیلوبایت
قیمت: 43680 تومان
توضیحات اضافی:
تعداد نظرات : 0