با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
دسته بندی:
عمران - بتن - Civil Engineering - Concrete
سال انتشار:
2017
ترجمه فارسی عنوان مقاله:
مروری بر موجودی چرخه عمر آب در تولید بتن
عنوان انگلیسی مقاله:
Life cycle water inventory in concrete production—A review
منبع:
Resources, Conservation and Recycling 122 (2017) 227–250
نویسنده:
Yazmin L. Mack-Vergara, Vanderley M. John
چکیده انگلیسی:
High water consumption and wastewater generation in the concrete industry have become very important environmental issues; however, water inventory data for concrete production and its raw materials are limited and inconsistent. The water use for different components (aggregates and cement) and processes in concrete production cradle-to-gate were identified along with water inventory figures. A large dispersion was found. The aim of this paper is to review the various water inventory methodologies and understand their implications on the water inventory figures in concrete’s life cycle to understand the wide dispersion of the inventory data that was found in the literature. The implications of the various methodologies on water inventory figures were tested in a hypothetical concrete production scenario. Our case scenario shows that methodology can give results that differed by a factor of approximately 3–4. Available data on water consumption should be use very carefully by LCA practitioners and the industry decision makers. This study concludes that there is a need for unification of the water inventory methodologies in order to have data that is actually comparable. Understanding the water inventory methodologies will result in more detailed and clarified water inventory and consequently a more thorough impact assessment will be possible. The results are of interest to the research community as well as to the stakeholders of the cement and concrete industries who seek sustainability in their products.
چکیده فارسی:
مصرف زیاد آب و تولید فاضلآب در صنعت بتن یکی از مسائل مهم محیط زیستی است؛ با این حال، داده های موجودی آب برای تولید بتن و مواد خام آن محدود و متناقض هستند. استفاده از آب برای اجزا (مصالح و سیمان) و فرایند های مختلف در تولید بتن از لحظه آبتدایی تا انتهای آن با ارقام موجودی آب شناسایی شده اند. پراکندگی زیادی وجود دارد. هدف این مقاله مرور روش های فهرست بندی آب مختلف و درک پیامد های آن ها بر روی شکل های مصرف آب در چرخه عمر بتن برای فهم پراکندگی گسترده داده های موجودی که در مقالات یافت شده است، است. پیامدهای روش های مختلف در ارقام موجودی آب با یک سناریوی تولید بتن فرضی آزمایش شدند. سناریوی موردی ما نشان داد که روش می تواند منجر به نتایجی شود که با یک فاکتور تقریبی 3-4 تفاوت پیدا کنند. داده های در دسترس درباره مصرف آب باید به دقت توسط شاغلین LCA و تصمیم گیرندگان صنایع مورد استفاده قرار بگیرد. این مطالعه به این نتیجه رسیده است که نیازی برای وحدت روش های موجودی آب وجود دارد تا داده هایی داشته باشیم که کاملا قآبل مقایسه باشند. فهم روش های موجودی آب منجر به موجودی آب جزیی تر و شفاف تری می شود و در نتیجه ارزیآبی دقیق تری ممکن خواهد بود. نتایج مورد علاقه جامعه پژوهشی و همچنین ذینفعان صنایع سیمان و بتن است که به دنبال توسعه پایدار محصولات خود هستند.
حجم فایل: 2070 کیلوبایت
قیمت: 43680 تومان
توضیحات اضافی: نظر
تعداد نظرات : 0