سال انتشار:
2017
ترجمه فارسی عنوان مقاله:
تاثیر خاکستر بادیFA) ) بر روی مقاومت فشاری و میکرو ویژگی های ملات سیمان منیزیم پتاسیم فسفات MKPC))
عنوان انگلیسی مقاله:
Influence of fly ash on compressive strength and micro-characteristics of magnesium potassium phosphate cement mortars
منبع:
Cement and Concrete Research 99 (2017) 86–94
نویسنده:
Biwan Xua,b,⁎, Hongyan Mac, Hongyu Shaoa, Zongjin Lia,d, Barbara Lothenbach
چکیده انگلیسی:
Although the reactivity of fly ash (FA) in magnesium potassium phosphate cement (MKPC) systems is still unclear, it has been generally treated as an inert filler in the mix designs of FA/MKPC-based materials. In this study, FA was incorporated in MKPC mortars through two different design methods, where FA was either treated as inert or reactive. Fresh performance, compressive strength and micro-characteristics of the FA/MKPC mortars were systematically evaluated. The experimental results show that the design method where FA was treated as reactive can lead to better fresh performance, better optimized microstructure and higher mechanical strengths. The SEM analysis indicates some reaction of the FA particles within the MKPC mortars; however, the detailed compositions of the formed secondary reaction products could not be directly determined by either XRD or TGA analysis. Furthermore, this study underlines the importance of two ratios, RMagnesia : FA and RKDP : (Magnesia+FA), in optimum designs of FA/MKPC-based materials.
چکیده فارسی:
اگر چه واکنش خاکستربادی(FA) ، درسیستم های سیمان منیزیم پتاسیم فسفات (MKPC) ، هنوزنامشخص است ، اما از آن به عنوان پرکننده ، در طرح ملاتهای بر پایه MKPC-FA یاد میشود. در این مقاله، FA در ملات MKPC به دو روش طراحی مختلف ، (بصورت بی اثر یا واکنش پذیر) ، در نظر گرفته میشود . در هر حالت ، عملکرد و کارایی جدید، مقاومت فشاری و میکرو ویژگی های ملات FA / MKPC، بطورسیستماتیک مورد بررسی قرارمیگیرد. نتایج تجربی نشان می دهد که روش طراحی که در آن FA به عنوان واکنش پذیروارد عمل شده است ، منجربه کارایی بهتر سیستم وباعث مطلوبتر شدن ریزساختارها ومقاومت مکانیکی بیشترمیشود. اگرچه آنالیز SEM ، برخی واکنشهای مربوط به ذرات FA در ملات MKPC را نشان میدهد ، اما ، جزئیات مربوط به محصولات واکنش ثانویه ، بوسیله آنالیز XRD یا TGA ، مستقیما قابل تشخیص نیست. بعلاوه ، این مقاله بر اهمیت دو نسبت، R Magnesia : FA ,KDP درطرح بهینه مواد بر اساس MKPC-FA ، تاکید دارد.
حجم فایل: 3024 کیلوبایت
قیمت:
28000 تومان
22400 تومان
(20 % تخفیف)
توضیحات اضافی: نظر
تعداد نظرات : 0