با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
دسته بندی:
مهندسی مکانیک - mechanical engineering
سال انتشار:
2013
ترجمه فارسی عنوان مقاله:
مطالعه ازمایشگاهی روی دیوارهای برشی با تقویت قطری با بازشوی مرکزی
عنوان انگلیسی مقاله:
Experimental study on diagonally stiffened steel plate shear walls with central perforation
منبع:
Sciencedirect - Elsevier - Journal of Constructional Steel Research 89 (2013) 9–20
نویسنده:
Erfan Alavi , Fariborz Nateghi
چکیده انگلیسی:
One of the advantages of Steel Plate Shear Walls (SPSWs) is the easiness of openings application in infill plate.
The openings are sometimes required for passing utilities, architectural purposes, and/or structural reasons.
However, the recent researches on perforated steel plate shear walls have shown that the shear strength and
stiffness of an un-stiffened steel shear wall decrease due to perforation of the infill plate. Hence, this paper
presents a special combination of diagonal stiffeners with a central perforation. The seismic behavior of the
new system is experimentally investigated and compared to the solid infill plate models. Experimental testing is performed on three ½ scaled single-story SPSW specimens under cyclic quasi-static loading. One of the
specimens is un-stiffened and the two others are diagonally stiffened, which in one of them, a circular opening with the diameter of ⅓ depth of the panel is cutout from the wall center. It is observed that by means of
the proposed stiffening method the shear strength of the perforated shear walls is achieved close to the
un-stiffened wall with the solid panel, and the seismic behavior of the system is considerably improved.
Test results show that the ductility ratio of the specially perforated specimen is about 14% greater than the
un-stiffened specimen. A formula is developed and verified for the estimation of the shear strength of a perforated and diagonally stiffened SPSW. There are good agreements between the experimental outcomes and
the theoretical predictions.
Keywords: Steel plate shear wall | Diagonal stiffener | Perforated | Opening | Behavior factor | Ductility ratio | Strengthening
چکیده فارسی:
یکی از امتیازات دیوار های برشی فولادی (spsws) اسانی ایجاد بازشو در پلیت داخلی است.ایجادبازشو گاهی برای عبور تسهیلات (اب و برق و..) ،اهداف معماری ،و /یا دلایل سازه ای ،لازم میشود. هرچند تحقیقات اخیر روی دیوارهای برشی فولادی نشان داده که مقاومت برشی و سختی یک دیواربرشی فولادی تقویت نشده بدلیل بازشوی داخل پلیت کاهش می یابد. بنابراین این مقاله یک ترکیب ویژه از سخت کننده های قطری با بازشوی دایره ای مرکزی را معرفی میکند. رفتار لرزه ای سیستم جدید بطور ازمایشگاهی مورد بررسی قرار گرفت و با روش پلیت داخلی صلب مقایسه شد. ازمایشات ازمایشگاهی روی سه نمونه دیوار برشی یک طبقه با مقیاس 1/2تحت بارگذاری سیکلی شبه استاتیکی انجام شد.یکی از نمونه ها بصورت تقویت نشده و دو نمونه ی دیگر با سخت کننده های قطری تقویت شد که در یکی از انها یک بازشودایره ای با قطر 1/3 عمق پانل در مرکز دیوار ایجاد شد. مشاهده شد که به وسیله ی روش سختی پیشنهادی، مقاومت برشی دیوار برشی بازشودار به دیوار سخت نشده با پانل صلب رسیده است و رفتار لرزه ای سیستم بطور قابل ملاحظه ای بهبود یافت. نتایج ازمایشات نشان داد که نسبت شکل پذیری نمونه های بازشودار ویژه در حدود 14% بزرگتر از نمونه ی بدون سخت کننده است. فرمول هایی برای تخمین مقاومت برشی دیوارهای برشی بازشودار و سخت شده ی قطری گسترش یافت و بررسی شد. مطابقت خوبی بین نتایج ازمایشگاهی و پیش بینی های تئوری وجود دارد
کلید واژه ها: دیوار برشی ورق فولادی | سفتانور مورب | سوراخ | باز کردن | عامل رفتار | نسبت ضریب پذیری | تقویت
حجم فایل: 2858 کیلوبایت
قیمت: 25200 تومان
توضیحات اضافی:
تعداد نظرات : 0