دانلود و نمایش مقالات مرتبط با Access::صفحه 5
دانلود بهترین مقالات isi همراه با ترجمه فارسی 2

با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد). 

نتیجه جستجو - Access

تعداد مقالات یافته شده: 1213
ردیف عنوان نوع
41 Implementation and Calibration of an IoT Light Attenuation Turbidity Sensor
پیاده سازی و کالیبراسیون سنسور مه آلود تضعیف نور اینترنت اشیا-2022
Turbidity is an important characteristic of water quality that can indicate the presence of un- desirable suspended particulate matter. Having access to an inexpensive and effective turbidity sensor unlocks numerous Internet of Things (IoT) possibilities for remote environmental moni- toring. Optical light attenuation turbidity sensors operate on the premise of detecting signal degradation from a light source due to scattering from particles in a solution. This approach is technologically unpretentious and only requires a handful of inexpensive electronic components to construct. However, while this method is touted as “simple”, a significant challenge lies in sensor calibration. That is, converting an analogue signal into a meaningful and accurate digital reading in a known turbidity measurement standard (e.g., Nephelometric Turbidity Units (NTU)). This paper presents an IoT light attenuation turbidity sensor design and explores the calibration process to determine the sensor’s range and accuracy. Sensor calibration is undertaken using Formazin turbidity standards and is cross-checked against a commercial turbidimeter. We provide a step-by-step procedure for determining the correct signal strength to use and a functional form for the sensor response to the Formazin standard. Finally, we specify an estimate of the accuracy of the sensor and suggest the next steps in the proposed turbidity sensor’s development. Results indicate that the sensor achieves within 2%-10% of accuracy at higher ranges (100–4000 NTU), but its performance becomes significantly less reliable in low NTU ranges (< 100 NTU) where the error rate increases to 26%. The turbidity sensor is used as part of an IoT remote aquatic envi- ronmental monitoring platform.
keywords: Internet of underwater things | Turbidity | Affordable sensors | Calibration | attenuation turbidimeter
مقاله انگلیسی
42 Introducing an application of an industry 4:0 solution for circular supply chain management
معرفی کاربرد راه حل صنعت 4:0 برای مدیریت حلقه تأمین دایره ای-2021
In recent years, sustainable supply chain management practices have been adopted by companies that desire to reduce the negative environmental and social impacts within their supply chains. Within this perspective, a circular approach has been developed in the supply chain literature. Circular economy models and solutions assisted by industry 4.0 technologies have been developed to transform products in the end of their life cycle into new products with different use. In this paper an industry 4.0 waste-to- energy solution is developed and applied in a pilot case study comprised by a real-world supply chain to evaluate the sustainability performance of circular supply chain management (CSCM). The findings show that redesigning supply chains for circular economy with the use of Industry 4.0 technologies, can enable circular supply chain management. Clear benefits are provided linking the proposed solution to the six circular economy dimensions of the ReSOLVE model i.e. regenerate, share, optimize, loop, virtualise, and exchange. Improved availability of personnel (5% and 15%) and fleet resources (15%) are identified as some of the key quantitative benefits, while supply chain traceability through the full visibility and automation offered by the proposed solution, are some of the key non-quantifiable out- comes. The present work seeks to contribute to the existing literature by providing empirical evidence of how industry 4.0 and circular economy are applied in practice. Implications for managers and policy makers, along with the study limitations and further research paths are also presented.© 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-NDlicense (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Keywords: Circular economy | Circular supply chain management (CSCM) | Industry 4.0 | Waste-to-energy | ReSOLVE model
مقاله انگلیسی
43 Nurses perspectives on pain management practices during newborn blood sampling in China
دیدگاه های پرستاران در مورد شیوه های مدیریت درد در طی نمونه گیری خون نوزادان در چین-2021
Introduction: Nurses’ use of evidence-based pain treatments for newborns during needle-related procedures in China was unknown. This study aimed to ascertain knowledge and use of pain management strategies and usefulness of a publicly accessible ’BSweet2Babies’ video, produced in Mandarin, demonstrating the use of breastfeeding, skin-to-skin care (SSC), and sweet solutions during painful procedures. Methods: An online survey was conducted during six nursing conferences in China ascertaining nurses’ previous viewing of the video and knowledge and use of the demonstrated strategies. Results: 221 nurses participated. Only 25 (11.3%) had previously seen the video. Over half knew that breast- feeding (n = 138, 62.4%) and SSC (n = 173, 78.3%) reduced pain, and 89 (40.3%) knew that sucrose reduced pain, but these strategies were infrequently used. Most intended to use the strategies in the future. Discussion: A knowledge-to-action gap for newborn pain management was identified. Future research is needed to improve the implementation of effective pain treatment for newborns.
keywords: نوزاد | درد رویه ای | مدیریت درد | تمرین مبتنی بر شواهد | نظر سنجی | Neonate | Procedural pain | Pain management | Evidence-based practice | Survey
مقاله انگلیسی
44 Trustworthy authorization method for security in Industrial Internet of Things
روش مجوز معتبر برای امنیت در اینترنت اشیا صنعتی-2021
Industrial Internet of Things (IIoT) realizes machine-to-machine communication and human–computer inter- action (HCI) through communication network, which makes industrial production automatic and intelligent. Security is critical in IIoT because of the interconnection of intelligent industrial equipment. In IIoT environment, legitimate human–computer interaction can only be performed by authorized professionals, and unauthorized access is not tolerated. In this paper, a reliable authentication method based on biological information is proposed. Specifically, the complete local binary pattern (CLPB) and the statistical local binary pattern (SLPB) are introduced to describe the local vein texture characteristics. Meanwhile, the contrast energy and frequency domain information are regarded as auxiliary information to interpret the finger vein. The distance between the features of the registration image and the test image is used to recognize the finger vein image, so as to realize identity authentication. The experiments are carried out on SDUMLA-FV database and FV-USM database, and results show that the presented method has achieved high recognition accuracy.
Keywords: Industrial Internet of Things (IIoT) | Human–computer interaction (HCI) | Biometric recognition | Comprehensive texture | Security system
مقاله انگلیسی
45 Biometric indices of eleven mangrove fish species from southwest Bangladesh
شاخص های بیومتریک یازده گونه ماهی حرا از جنوب غربی بنگلادش-2021
Biometric indices, i.e. i) length-weight relationships (LWRs), ii) form factor (a3.0), iii) length-frequency distributions (LFDs), and iv) condition factors (relative KR and Fulton’s KF) are considered to be very cru- cial in the assessment of fishery studies as they provide information on fish population growth and coastal habitat well-being. The study of biometric indices of mangrove fish has, however, received little attention. Our research investigates the LFDs, LWRs, a3.0, KR and KF of 395 individuals from nine families (Latidae, Engraulidae, Gobiidae, Mugilidae, Synbranchidae, Schilbeidae, Scatophagidae, Plotosidae, and Terapontidae). The LFDs showed that the lowest total length (TL) was 4.57 cm for Stolephorus tri, and highest TL was 56.20 for Monopterus cuchia. The LWRs showed that the b (allometric coefficient) values ranging from 2.01 (Plotosus canius) to 3.29 (Terapon jarbua), appeared as highly significant (P < 0.001). Moreover, the KR values ranged from 0.80 to 1.36, which indicate a good state of health of the population. Our findings could be useful in updating the FishBase (online database) and tracking mangrove fish spe- cies sustainably.© 2021 National Institute of Oceanography and Fisheries. Hosting by Elsevier B.V. This is an open accessarticle under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Keywords: Length-weight relationship | Growth | Form factor | Condition | FishBase
مقاله انگلیسی
46 Biometric characteristics of Trachinus araneus Cuveir, 1829, Trachinus draco Linnaeus, 1758 and Trachinus radiatus Cuveir, 1829 (Pisces; Trachinidae) from the Egyptian Mediterranean waters
Biometric characteristics of Trachinus araneus Cuveir, 1829, Trachinus draco Linnaeus, 1758 and Trachinus radiatus Cuveir, 1829 (Pisces; Trachinidae) from the Egyptian Mediterranean waters-2021
The biometric characteristics of Trachinus araneus, Trachinus draco and Trachinus radiatus from the Egyptian Mediterranean waters at the West of Alexandria City, were studied. In total, 105, 96 and 55 specimens of these three Fish species were sampled, respectively, by the use of bottom trawls operated in the sectors of El-Dabaa and Sidi Abd El Rahman. The morphological characteristic and related index ratio were determined. The results showed that T. araneus total length varied from 10.9 to 30.0 cm TL with mean length of 19.87 ± 5.43 cm TL and a number of horizontal dots appear to be distributed along the lateral line, T. draco total length was 11.8 to 27.6 cm TL with a mean length of 17.85 ± 4.23 cm TL, and specimens of this Fish species showed yellow vertical oblique lines on the body. On the other hand, T. radiatus is characterized by a total length of 10.6 to 35.0 cm TL with a mean length 18.04 ± 4.87 cm TL, and by circular brown dots spread on the whole body and head. Furthermore, these three Fish species have poisonous spines, one on each operculum, and both spines on the internal border of the dorsal part of each eye orbit. The morphometric regression of each morphometric character showed close agreement between the observed and calculated values.© 2021 National Institute of Oceanography and Fisheries. Hosting by Elsevier B.V. This is an open accessarticle under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Keywords: Biometric | Characteristics | Trachinus araneus | Trachinus draco | Trachinus radiatus | Mediterranean waters | Egypt
مقاله انگلیسی
47 A novel multi-lead ECG personal recognition based on signals functional and structural dependencies using time-frequency representation and evolutionary morphological CNN
تشخیص شخصی نوار قلب ECG مبتنی بر وابستگی های عملکردی و ساختاری سیگنالها با استفاده از نمایش فرکانس زمان و CNN مورفولوژیکی تکاملی-2021
Biometric recognition systems have been employed in many aspects of life such as security technologies, data protection, and remote access. Physiological signals, e.g. electrocardiogram (ECG), can potentially be used in biometric recognition. From a medical standpoint, ECG leads have structural and functional dependencies. In fact, precordial ECG leads view the heart from different axial angles, whereas limb leads view it from various coronal angles. This study aimed to design a personal biometric recognition system based on ECG signals by estimating these latent medical variables. To estimate functional dependencies, within-correlation and cross- correlation in time-frequency domain between ECG leads were calculated and represented in the form of extended adjacency matrices. CNN trees were then introduced through genetic programming for the automated estimation of structural dependencies in extended adjacency matrices. CNN trees perform the deep feature learning process by using structural morphology operators. The proposed system was designed for both closed-set identification and verification. It was then tested on two datasets, i.e. PTB and CYBHi, for performance evaluation. Compared with the state-of-the-art methods, the proposed method outperformed all of them.
Keywords: Biometrics | Electrocardiogram | Functional dependencies | Structural dependencies | Genetic programming | Convolutional neural networks
مقاله انگلیسی
48 Sexual-predator Detection System based on Social Behavior Biometric (SSB) Features
سیستم تشخیص جنسی-شکارچی بر اساس ویژگی های بیومتریک رفتار اجتماعی (SSB)-2021
This study designs an online sexual predator detection system using Social Behavior Biometric (SSB) features. Social biometric focuses on extracting the pattern a user exhibits while interacting and communicating through social networks. The paper addresses the online sexual predator problem by mining the vocabulary and emotional behavior, which could assist in identifying if the user is a benign or predator. The feature-set consists of vocabulary terms that appear differently in predator and victim content. In order to strengthen the detection model, the paper also focuses on distinguishing the two classes of users based on emotions reflected in their conversation. The experiments are performed on the PAN 2012 corpus. Two datasets are created with respect to vocabulary-based and emotion-based features. The results obtained on the test set have proved that by integrating the vocabulary and emotion-based attributes, the performance of the system is significantly enhanced. While comparing, the proposed approach has outperformed top existing methods by obtaining F1, F2, and F0.5values of 0.95, 0.94, and 0.96 respectively. Furthermore, we also recorded the best accuracy compared to state-of-the-art studies for our proposed SBB-based approach with 99.86%, 99.51%, and 99.88% for Decision Tree (DT), Support Vector Machine (SVM), and Random Forest (RF) respectively.© 2021 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0)Peer-review under responsibility of the scientific committee of the 5th International Conference on AI in Computational Linguistics.
Keywords: Online Sexual Predators | Emotion mining | Lexical analysis Machine Learning
مقاله انگلیسی
49 NGOs, public accountability, and critical accounting education: Making data speak
سازمان‌های غیردولتی، مسئولیت‌پذیری عمومی و آموزش حسابداری انتقادی: صحبت کردن از داده‌ها-2021
The purpose of the paper is to provide theoretical and empirical insights into NGO accountability in the context of public sector accounting. We present a case study of two advocacy Italian NGOs which act as informational surrogates in the accountability relationship between local governments and the civic public. We extend the concept of surrogate accountability by integrating accounting education as one of its features. Alongside making data accessible, NGOs in our case explain accounting terms and organise educational events. By doing so, they aim to “repair” the weak information link in the accountability mechanism of local governments.
keywords: آموزش حسابداری انتقادی | پاسخگویی به سازمان های غیر دولتی | دولت باز | پاسخگویی عمومی | پاسخگویی جایگزین | شفافیت | Critical accounting education | NGO accountability | Open government | Public accountability | Surrogate accountability | Transparency
مقاله انگلیسی
50 Digital Livestock Farming
دامداری دیجیتال-2021
As the global human population increases, livestock agriculture must adapt to provide more livestock products and with improved efficiency while also addressing concerns about animal welfare, environmental sustainability, and public health. The purpose of this paper is to critically review the current state of the art in digitalizing animal agriculture with Precision Livestock Farming (PLF) technologies, specifically biometric sensors, big data, and blockchain technology. Biometric sensors include either noninvasive or invasive sensors that monitor an individual animal’s health and behavior in real time, allowing farmers to integrate this data for population-level analyses. Real-time information from biometric sensors is processed and integrated using big data analytics systems that rely on statistical algorithms to sort through large, complex data sets to provide farmers with relevant trending patterns and decision-making tools. Sensors enabled blockchain technology affords secure and guaranteed traceability of animal products from farm to table, a key advantage in monitoring disease outbreaks and preventing related economic losses and food-related health pandemics. Thanks to PLF technologies, livestock agriculture has the potential to address the abovementioned pressing concerns by becoming more transparent and fostering increased consumer trust. However, new PLF technologies are still evolving and core component technologies (such as blockchain) are still in their infancy and insufficiently validated at scale. The next generation of PLF technologies calls for preventive and predictive analytics platforms that can sort through massive amounts of data while accounting for specific variables accurately and accessibly. Issues with data privacy, security, and integration need to be addressed before the deployment of multi-farm shared PLF solutions be- comes commercially feasible. Implications Advanced digitalization technologies can help modern farms optimize economic contribution per animal, reduce the drudgery of repetitive farming tasks, and overcome less effective isolated solutions. There is now a strong cultural emphasis on reducing animal experiments and physical contact with animals in-order-to enhance animal welfare and avoid disease outbreaks. This trend has the potential to fuel more research on the use of novel biometric sensors, big data, and blockchain technology for the mutual benefit of livestock producers, consumers, and the farm animals themselves. Farmers’ autonomy and data-driven farming approaches compared to experience-driven animal manage- ment practices are just several of the multiple barriers that digitalization must overcome before it can become widely implemented.
Keywords: Precision Livestock Farming | digitalization | Digital Technologies in Livestock Systems | sensor technology | big data | blockchain | data models | livestock agriculture
مقاله انگلیسی
rss مقالات ترجمه شده rss مقالات انگلیسی rss کتاب های انگلیسی rss مقالات آموزشی
logo-samandehi
بازدید امروز: 3687 :::::::: بازدید دیروز: 3097 :::::::: بازدید کل: 37954 :::::::: افراد آنلاین: 41