با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
ردیف | عنوان | نوع |
---|---|---|
1 |
Optimizing the electrical conductivity of polyacrylonitrile/polyaniline with nickel nanoparticles for the enhanced electrostimulation of Schwann cells proliferation
بهینه سازی رسانایی الکتریکی پلی اکریلونیتریل/پلی آنیلین با نانوذرات نیکل برای تحریک الکتریکی افزایش یافته تکثیر سلول های شوان-2021 Tissue engineering scaffolds made of biocompatible polymers are promising alternatives for nerve reparation. For this application, cell proliferation will be speeded up by electrostimulation, which required
electrically-conductive materials. Here, a biomimicking scaffold with optimized conductivity was developed from electrospun polyacrylonitrile/electrically-conductive polyaniline (PAN/PANI) nanofibers
doped with Ni nanoparticles. PAN/PANI/Ni was biocompatible for Schwann cells and exhibited a suitable
tensile strength and wettability for cell proliferation. When compared with unmodified PAN/PANI, the
electrical conductivity of PAN/PANI/Ni was 6.4 fold higher. Without electrostimulation, PAN/PANI and
PAN/PANI/Ni exhibited similar Schwann cells’ proliferation rates. Upon electrostimulation at
100 mV cm1 for one hour per day over five days, PAN/PANI/Ni accelerated Schwann cells’ proliferation
2.1 times compared to PAN/PANI. These results demonstrate the importance of expanding the electrical
conductivity of the tissue engineering scaffold to ensure optimal electrostimulation of nerve cell growth.
Additionally, this study describes a straightforward approach to modulate the electrical conductivity of
polymeric materials via the addition of Ni nanoparticles that can be applied to different biomimicking
scaffolds for nerve healing.
Keywords: Nerve tissue engineering | Electrospinning | PAN/PANI | Ni nanoparticles | Schwann cells |
مقاله انگلیسی |
2 |
Electro-conductive carbon nanofibers containing ferrous sulfate for bone tissue engineering
Electro-conductive carbon nanofibers containing ferrous sulfate for bone tissue engineering-2021 The application of electroactive scaffolds can be promising for bone tissue engineering applications. In the
current paper, we aimed to fabricate an electro-conductive scaffold based on carbon nanofibers (CNFs) containing ferrous sulfate. FeSO4⋅7H2O salt with different concentrations 5, 10, and 15 wt%, were blended with
polyacrylonitrile (PAN) polymer as the precursor and converted to Fe2O3/CNFs nanocomposite by electrospinning and heat treatment. The characterization was conducted using SEM, EDX, XRD, FTIR, and Raman
methods. The results showed that the incorporation of Fe salt induces no adverse effect on the nanofibers
morphology. EDX analysis confirmed that the Fe ions are uniformly dispersed throughout the CNF mat. FTIR
spectroscopy showed the interaction of Fe salt with PAN polymer. Raman spectroscopy showed that the incorporation of FeSO4⋅7H2O reduced the ID/IG ratio, indicating more ordered carbon in the synthesized nanocomposite. Electrical resistance measurement depicted that, although the incorporation of ferrous sulfate
reduced the electrical conductivity, the conductive is suitable for electrical stimulation. The in vitro studies
revealed that the prepared nanocomposites were cytocompatible and only negligible toxicity (less than 10%)
induced by CNFs/Fe2O3 fabricated from PAN FeSO4⋅7H2O 15%. Although various nanofibrous composite
fabricated with Fe NPs have been evaluated for tissue engineering applications, CNFs exhibited promising
properties, such as excellent mechanical strength, biocompatibility, and electrical conductivity. These results
showed that the fabricated nanocomposites could be applied as the bone tissue engineering scaffold.
Keywords: Bone tissue engineering | Electrospinning | Carbon nanofiber | Ferrous sulfate |
مقاله انگلیسی |
3 |
Fabrication of phase-change core/shell nanofibers based on a eutectic fatty acid mixture to control body temperature fluctuations
ساخت نانوالیاف هسته / پوسته تغییر فاز بر اساس مخلوط اسید چرب یوتکتیک برای کنترل نوسانات دمای بدن-2020 A sustainable eutectic mixture of two fatty acids, i.e. Lauric acid (LA) and Palmitic acid (PA), was produced as
Phase Change Materials (PCMs) to control body temperature fluctuations. Based on thermodynamic calculations
and related experimental analyses, the mass ratio of the mixture was chosen as LA:PA ¼ 69:31. A core-shell
structure was prepared through coaxial electrospinning, so as to prevent the leakage of PCM during phase
change from the solid state to liquid one. Nylon 6 covered the core as the shell of the prepared nanofiber. The
optimized nanofibers were obtained with the diameter of 152.7 nm. The produced PCM possessed an onset
melting temperature of 32.17 �C, which was close to the normal body temperature (i.e., 37 �C). Thermal performance
of PCM in the nanofiber core-shell structure analyzed by an image processing technique showed that
the sample containing PCMs exhibited enhanced thermal properties during the cooling down process.. Keywords: Eutectic mixture | Fatty acid | Coaxial electrospinning | Phase change material | Energy management |
مقاله انگلیسی |
4 |
Shape-stable thermo-responsive nano Fe3O4/fatty acids/PET composite phase-change material for thermal energy management and saving applications
شکل دهی به پایدار نانو Fe3O4 با پاسخگویی حرارتی / اسیدهای چرب / مواد تغییر فاز کامپوزیت PET برای مدیریت انرژی حرارتی و صرفه جویی در برنامه های کاربردی-2020 Organic phase change materials are sensitive to temperature calling thermo-responsive materials having ability
of thermal energy storage/release in a warm/cold medium through latent heat, indicating proper potential for
better thermal energy management. Nonetheless, leakage during melting and undesirable thermal conductivity
are considered as two major disadvantages. Herein, for the first time, a simple one-step route is suggested for
preparing novel shape-stable nano Fe3O4/fatty acids/PET composite can be utilized in thermal energy saving
and management applications. This is based on simultaneous embedment of fatty acids as phase change materials
into polyester (PET) fibers as supporting material and formation of iron oxide nanoparticles. The present
approach not only obviates two stated drawbacks but also it is free from separately forming or providing nanoparticles
and utilizing micro/nano encapsulation or electrospinning which may contain toxic chemicals. It is
further conducted in one-single step preferring in the view of both economic and environmental aspects. The
composites indicated promising phase temperature intervals of 36.3–54.1 and 26.9–35.5 °C for melting and
freezing with latent heats of 40.3–59.7 and 40.1–58.2 J/g, respectively. The embedment of iron oxide nanoparticles
resulted in thermal conductivity elevation around 44.5–85.8%. The prepared samples displayed good thermal endurance and reliability after 100 thermal treatments. They also had no leakage even after 120 min at
75 °C revealed their appropriate leakage-proof property in real usages. Overall, the paper introduces an affordable
one-step mode for fabricating shape-stable nano-enhanced composite with proper thermal features for
practical thermal energy management and saving applications. Keywords: Phase change materials | Thermal conductivity | Thermal management and storage | Fatty acid | Iron oxide nanoparticles |
مقاله انگلیسی |
5 |
اصلاح نانوفیبرهای پلی اکریلونیتریل الکتروریسی با نانوذرات ZnO و کاربرد آنها برای حذف یون های Pb از آب زائد
سال انتشار: 2016 - تعداد صفحات فایل pdf انگلیسی: 9 - تعداد صفحات فایل doc فارسی: 27 رفتار جذب سرب (II) از محلول های آبی با استفاده از نانوفیبرهای اکسید روی/ پلی اکریلونیتریل (PAN) مورد مطالعه قرار گرفته است. نانوفیبرهای ZnO/PANتوسط روش الکتروریسی آماده شده اند. تغییرات پارامترهای مقدار جاذب، pH، زمان تماس و دما در آزمایش های جذب مورد آزمایش قرار گرفته است. جذب بخوبی توسط مدل همدمای جذب لانگمویر توصیف شده است. پارامترهای ترمودینامیکی نشان می دهند که فرآیند جذب یک فرآیند گرمازا است. رفتار دینامیکی جذب یون های سرب (II) توسط نانوفیبرهای PAN/ZnO بخوبی توسط مدل سینیتیکی شبه درجه دوم توصیف شده است. جاذب می تواند با فرآیندهای جذب مناسب جهت کاربردهای چندگانه بدون اتلاف ظرفیت جذبش بازسازی شود.
کلمات کلیدی: جذب | پلی اکریلونیتریل | نانوذرات ZnO | یون های سرب (II) | نانوفیبرها |
مقاله ترجمه شده |
6 |
روش های آماری برای پارامترها و خواص پلی الکتروریسی (L-لاکتید) مهندسی داربست بافت ها - قسمت اول : طراحی آزمایش
سال انتشار: 2014 - تعداد صفحات فایل pdf انگلیسی: 12 - تعداد صفحات فایل doc فارسی: 32 مهندسی داربست بافت تولید شده توسط الکتروریسیته بسیار جالب می باشد، اما هنوز ادراک حقیقی و دقیقی در مورد ارتباط اساسی بین عملکرد خواص برجسته، معماری، مکانیکی و پارامترهای فرایند وجود ندارد . نتایج ناقص از چندین مطالعه در مورد پارامترها ارائه قسمتی جزئی از بینش کلی است که به طور کلی با نقش پارامترهای تعامل قابل مقایسه نیست . بخاطر این موضوع ، این مقاله (قسمت 1 از 2) ویژگی های موردی داربست پلی-L-لاکتید در روش آماری و طراحی آزمایش کمی می تواند همبستگی موجود بین خواص کلیدی داربست و کنترل پارامترها را شناسایی بکند، و شیوه جامعی در حل و فصل تاثیرات اصلی از فعل و انفعالات را ارائه بکند . خواص مورفولوژیکی (به عنوان مثال، توزیع و تخلخل فیبر) و خواص مکانیکی آن (مدول یانگ) به عنوان تابعی از وزن مولکولی (MW) و فرآیند الکتروریسی پارامترها (XS)، با توجه به تک اثر بودن و تعامل بین XS ها ارائه می شود . برای اولین بار، نقش MW به وضوح در کنترل همه خواص داربست مشاهده می شود.به ارتباط مکانیکی و خصوصیات مورفولوژیکی نیز پرداخته شده است.
کلید واژه ها: مطالعه پارامتری | ارتباطات ویژگی-ساختار | خواص مکانیکی | کنترل فرآیند | بیومتریال | الکتروریسی |
مقاله ترجمه شده |