دانلود و نمایش مقالات مرتبط با Error compensation::صفحه 1
دانلود بهترین مقالات isi همراه با ترجمه فارسی 2

با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد). 

نتیجه جستجو - Error compensation

تعداد مقالات یافته شده: 2
ردیف عنوان نوع
1 An improved interface and noise analysis of a turning fork microgyroscope structure
تحلیل رابط کاربری و نویز بهبود یافته یک ساختار میکرو ژیروسکوپ دیاپازونی-2016
This paper analyzes different noise components in MEMS gyroscope silicon structure, including mechanical–thermal noise (MTN), electronic-thermal noise (ETN), flicker noise (FN) and Coriolis signal in-phase noise (IPN). The structure equivalent electronic model is established, and the improved differential interface is proposed based on weak signal detection technology, after that, the noise components in silicon structure are introduced and analyzed in sense open loop. The quadrature error (QE) signal automatically cancellation loop is proposed, and the results of the experiment indicate that the equivalent angular rates of QE and IPN are 461/s and 4.551/s respectively. The interfaces contrast experiments show that the DC noise and the useful signal amplitudes of differential and single-side detection interfaces are — 49.8 dBmV, — 16.8 dBmV and— 39.8 dBmV ( — 42.1 dBmV), — 22.1 dBmV ( — 22.2 dBmV), which confirms the differential interface has better SNR. The carrier experiments also illustrate that higher carrier frequency (from 500 kHz to 10 MHz) can restrain DC noise (from — 19.8 dBmV to— 54.2 dBmV) better, which demonstrate the FN is the dominant noise component of the silicon structure under normal temperature. The temperature experiments show the DC noise enhances from — 48.5 dBmV to — 14.6 dBmV over the range 20 1C to 601C while the useful signal amplitude remains around -16.6dBmV, and this phenomenon indicates the MTN and ETN become the dominant structure noise components gradually with temperature rising.& 2015 Elsevier Ltd. All rights reserved.
Keywords: MEMS gyroscope | Structure noise | Carrier frequency | Temperature | Quadrature error compensation
مقاله انگلیسی
2 مدل سازی و جبران خطاهای حجمی برای ابزار و ماشین الات پنج محور
سال انتشار: 2016 - تعداد صفحات فایل pdf انگلیسی: 14 - تعداد صفحات فایل doc فارسی: 38
در این مقاله، روشی برای اندازهگیری ، مدلسازی و جبران خطاهای حجمی وابسته و غیر وابسته به هندسه در ابزار و ماشین الات پنج محوری ، ابزار و ماشین آلات CNC پشت سر هم (زنجیره ای) پیشنهاد شده است. سینماتیک جلو و معکوس ماشین الات با استفاده از تئوری پیچش مدل شده است، و 41 خطا ناشی از همه 5 محور ، با پیچ خوردگیهای حرکت خطا، نشان داده شده اند. خطاهای اجزا ناشی از محرکهای انتقالی با استفاده از تداخل سنج لیزری اندازه گیری شد، و خطاهای محرکهای دو چرخشی با اندازه گیریهای توپ، نوار ( ballbar) شناسایی شدند. مدل کامل خطای حجمی از ماشین پنج محوری در سیستمی با مختصاتِ ماشین ، مدلسازی شده و به صورت تجربی اثبات شد. خطاهای حجمی در امتداد مسیر ابزار؛ در مختصات قطعات نگاشته شده، و با استفاده از یک مدل سینماتیکی از ماشین جبران شدند. استراتژی جبران روی ماشین ابزار پنج محوری؛ کنترل شده با یک CNC صنعتی با ازادی محدود و نیز با CNC مجازی که امکان تلفیق جبران همه 41 خطا را فراهم مینماید، نشان داده شد.
کلمات کلیدی: ماشین ابزار پنج محور | خطای حجمی | خطا های اندازه گیری | خطا جبران | تئوری پیچ
مقاله ترجمه شده
rss مقالات ترجمه شده rss مقالات انگلیسی rss کتاب های انگلیسی rss مقالات آموزشی
logo-samandehi
بازدید امروز: 2975 :::::::: بازدید دیروز: 3084 :::::::: بازدید کل: 6059 :::::::: افراد آنلاین: 39