دانلود و نمایش مقالات مرتبط با Exergy destruction::صفحه 1
بلافاصله پس از پرداخت دانلود کنید

با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد). 

نتیجه جستجو - Exergy destruction

تعداد مقالات یافته شده: 4
ردیف عنوان نوع
1 Employing V-shaped ribs and nanofluid as two passive methods to improve second law characteristics of flow within a square channel: A two-phase approach
استفاده از دنده های V شکل و نانوسیال به عنوان دو روش غیرفعال برای بهبود ویژگی های قانون دوم جریان در یک کانال مربع: یک روش دو فاز-2020
This research attempts to investigate the effects of simultaneous utilization of V-shaped ribs and nanofluid as two heat transfer enhancement approaches inside a square channel on the second law at- tributes. For this purpose, the comprehensive entropy generation and exergy destruction analyses are car- ried out with the aid of the two-phase mixture technique for the copper–water nanofluid flow through the channel enhanced with the 45 °V-shaped ribs. Firstly, a comparison is made between attack angles of 45 °and 60 °, which unveils the superiority of 45 °because it shows lower entropy generation. The Cu nanoparticles are utilized as the main nanoparticles. Furthermore, the nanofluids containing the Ag nanoparticles are also simulated at two volume fractions of 0.01 and 0.03 to make comparison between different nanoparticle materials. The impacts of rib configuration including the rib pitch and its height are assessed using three rib pitches and three rib heights. The total entropy generation and total exergy destruction decrease as the volume fraction increases, such that an around 31.85% reduction occurs in the total entropy generation and total exergy destruction when the volume fraction increases by 0.03 for the case of rib height of 5 mm and rib pitch of 100 mm. Thereby, the second law efficiency rises by 15.64% in the same condition. Additionally, the installed 45 °V-shaped ribs remarkably contribute to the total irreversibility reduction by means of creating four recirculation flows and powerful swirl flows. The re- sults indicate that utilizing both larger rib height and smaller rib pitch (at the same time) exhibits lower exergy destruction and enhances the second law efficiency.
Keywords: Two-phase mixture model | second law efficiency | v-shaped rib | entropy generation | nanofluid | exergy destruction
مقاله انگلیسی
2 CFD analysis of second law characteristics for flow of a hybrid biological nanofluid under rotary motion of a twisted tape: Exergy destruction and entropy generation analyses
تجزیه و تحلیل CFD از ویژگی های قانون دوم برای جریان یک نانوسیالات بیولوژیکی ترکیبی تحت حرکت چرخشی نوار پیچ خورده: تخریب اگزرژی و تجزیه و تحلیل نسل آنتروپی-2020
The main goal of the current study is to evaluate the effects of a hybrid heat transfer enhancement method, i.e. simultaneous deployment of active and passive techniques, with employing an ecofriendly-produced graphene nanoplatelets nanofluid from the viewpoint of the second law of thermodynamics. The numerical simulations are performed for the tubes enhanced with the innovative rotary twisted tape. Employing the rotary twisted tape intensifies the flow mixing, disrupts the thermal boundary layer, and reduces the temperature gradients dramatically. The total entropy generation and total exergy destruction of nanofluid extremely diminish by the rotational speed elevation. The maximum decrement in the total entropy generation is 87.38%, which occurs by elevating the rotational speed from 0 to 900 rpm. The concentration increase considerably contributes to the exergy destruction decrement besides total entropy generation reduction. The lower twisted ratio exhibits the smaller thermal irreversibility, and the best second law efficiency equals to 0.932.
Keywords: Exergy destruction | Rotational twisted tape | Graphene nanoplatelets nanofluid | Entropy generation | Ecofriendly nanofluid | Second law efficiency
مقاله انگلیسی
3 Second-law analysis of the reforming-controlled compression ignition
تجزیه و تحلیل قانون دوم احتراق فشرده سازی کنترل شده اصلاح-2020
This paper presents the optimization of energy conversion in a novel reforming-controlled compression ignition system, combining the benefits of low-temperature combustion with high-pressure thermochemical recuperation (mostly from the perspective of the second law of thermodynamics). Further, new insights into ways of improving efficiency are provided. A promising renewable fuel dimethyl ether is analyzed for the first time as a primary fuel. A comprehensive analysis of various factors influencing exergy destruction in the reformingcontrolled compression ignition system in their complex interdependence is also performed for the first time. Exergy mapping results show that approximately 33% of the exergy supplied to the system is destroyed owing to irreversible processes in the cylinder itself, and approximately 5% is destroyed in the reforming system (intercooler, vaporizer, and reformer). The reformer is the main source of exergy destruction in the reforming system. Approximately 45% and 38% of the engine exergy destruction is related to chemical reaction and in-cylinderwalls heat interaction, respectively. The results indicate that the efficiency improvement due to second-law optimization reaches up to 7.1%, and if the compression ratio is increased to 18:1 instead of 16:1, this reaches up to 9.2%. The higher improvement is achieved at the highest loads.
Keywords: Homogeneous charge compression ignition | Fuel reactivity control | Thermochemical recuperation | Exergy analysis | Hydrogen | Dimethyl ether
مقاله انگلیسی
4 تحلیل انرژی و اکسرژی یک چرخه سرمایش ترکیبی جدید تقویت شده با افشانه
سال انتشار: 2015 - تعداد صفحات فایل pdf انگلیسی: 9 - تعداد صفحات فایل doc فارسی: 27
یک چرخه سرمایش ترکیبی جدید تقویت شده با افشانه با استفاده از مخلوط مبردهای R134a/R23 در این مقاله ارائه شده است. در این چرخه جدید، یک افشانه برای بازیابی بخشی از کاری که در فرآیندهای اختناق هدر می‌رود به‌کار رفته است. مقایسه عملکرد بین چرخه جدید و یک چرخه سرمایش ترکیبی اولیه بر اساس قوانین اول و دوم ترمودینامیک انجام می‌گیرد. نتایج شبیه‌سازی نشان می‌دهند که ضریب عملکرد و بازده اکسرژی چرخه جدید را می‌توان در مقایسه با چرخه‌های اولیه در همان شرایط کاری 8.24% تا 18.02% افزایش داد. مشخص می‌شود که در چرخه جدید، بالاترین اتلاف اکسرژی به ترتیب در کمپرسور، کندانسور، کندانسور ترکیبی، شیر انبساط، افشانه و اواپراتور رخ می‌دهد. اثر برخی پارامترهای اصلی روی عملکرد چرخه در ادامه بررسی می‌شود. نتایج نشان می‌دهند که برای چرخه جدید، بهبود عملکرد حاصله نسبت به چرخه اولیه به ترکیب مخلوط و کیفیت بخار در خروجی کندانسور بستگی دارد. بهبود ضریب عملکرد چرخه جدید نسبت به چرخه اولیه با افزایش کیفیت بخار کاهش می‌یابد. هم‌چنین، با معلوم بودن دیگر شرایط کاری، ترکیب مخلوط بهینه‌ای برای دست‌یابی به بیش‌ترین ضریب عملکرد برای چرخه جدید وجود دارد. ترکیب مخلوط بهینه هر دو چرخه تحت دمای تبخیر مشخص، باید در حدود 0.5 نگه داشته شود. کلمات کلیدی: مخلوط Zeotropic | چرخه تبرید خودکار آبشار | اجکتور | بهبود عملکرد
مقاله ترجمه شده
rss مقالات ترجمه شده rss مقالات انگلیسی rss کتاب های انگلیسی rss مقالات آموزشی
logo-samandehi
بازدید امروز: 2637 :::::::: بازدید دیروز: 3097 :::::::: بازدید کل: 36904 :::::::: افراد آنلاین: 52