دانلود و نمایش مقالات مرتبط با Heating rate::صفحه 1
بلافاصله پس از پرداخت دانلود کنید

با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد). 

نتیجه جستجو - Heating rate

تعداد مقالات یافته شده: 5
ردیف عنوان نوع
1 High-Stability Cryogenic System for Quantum Computing With Compact Packaged Ion Traps
سیستم برودتی با پایداری بالا برای محاسبات کوانتومی با تله های یونی بسته بندی شده فشرده-2022
Cryogenic environments benefit ion trapping experiments by offering lower motional heating rates, collision energies, and an ultrahigh vacuum (UHV) environment for maintaining long ion chains for extended periods of time. Mechanical vibrations caused by compressors in closed-cycle cryostats can introduce relative motion between the ion and the wavefronts of lasers used to manipulate the ions. Here, we present a novel ion trapping system where a commercial low-vibration closed-cycle cryostat is used in a custom monolithic enclosure. We measure mechanical vibrations of the sample stage using an optical interferometer, and observe a root-mean-square relative displacement of 2.4 nm and a peak-to-peak displacement of 17 nm between free-space beams and the trapping location. We packaged a surface ion trap in a cryopackage assembly that enables easy handling while creating a UHV environment for the ions. The trap cryopackage contains activated carbon getter material for enhanced sorption pumping near the trapping location, and source material for ablation loading. Using 171Yb+ as our ion, we estimate the operating pressure of the trap as a function of package temperature using phase transitions of zig-zag ion chains as a probe. We measured the radial mode heating rate of a single ion to be 13 quanta/s on average. The Ramsey coherence measurements yield 330-ms coherence time for counter-propagating Raman carrier transitions using a 355-nm mode-locked pulse laser, demonstrating the high optical stability.
INDEX TERMS: Optomechanical design | quantum computing | trapped ions.
مقاله انگلیسی
2 Experimental and feasibility study of spent coffee grounds upscaling via pyrolysis towards proposing an eco-social innovation circular economy solution
مطالعه تجربی و امکان سنجی قهوه مصرفی که از طریق تجزیه در اثر تجزیه در اثر تجزیه در اثر تجزیه در اثر تجزیه در اثر تجزیه در اثر تجزیه در اثر استفاده از تجزیه در اثر تجزیه و تحلیل مواد شیمیایی ، به منظور ارائه یک راه حل اقتصاد دایره ای نوآوری اقتصادی - اجتماعی-2020
There is a need for eco-social business models in the food waste sector that are more cascading and circular- based, while having economic, environmental and social benefits. The aim of this study is to bring insights and data of spent coffee grounds large-scale slow pyrolysis, to seize new opportunities for eco-innovative solutions in the circular economy, by identifying upcycling opportunities for resource recovery of this waste. First, an experimental study was conducted, and a set of pyrolysis experiments were carried out at a temperature range from 450 to 750 °C, with a heating rate of 50°/s, under helium atmosphere, to explore the products yields and the best process conditions. Second, an economic study was conducted for a standalone pyrolysis plant fueled with the spent coffee grounds streams from coffee shops of a city with 150,000 inhabitants, in central Greece, aiming at the cost and the profitability of the endeavor estimation. The calculations were based on the features of a slow pyrolysis rotary kiln technology designed at Aristotle University, and co-developed with an Irish company, under the funding of an EU LIFE+ project. For an estimated capacity of 2566 t/yr of SCG, the revenue of the endeavor was calculated at 47€/t of SCG. The economic indicators ROI and POT (ROI = 0.24, POT = 2.6), are very Abbreviations: CE, circular economy; FL, food loss; FW, food waste; HHV, higher heating value; LHV, lower heating value; POT, payout time; ROI, return on investment; SCG, spent coffee ground; GC, gas chromatograph.⁎ Corresponding author. E-mail address: azampani@auth.gr (A. Zabaniotou).https://doi.org/10.1016/j.scitotenv.2020.137316 0048-9697/© 2020 Elsevier B.V. All rights reserved. positive, suggesting pyrolysis of SCG as an efficient circular economy management solution, providing an eco- social innovation business in the coffee shop industry, engaging also consumers in the circular economy.‌© 2020 Elsevier B.V. All rights reserved.
Keywords: Circular economy | Food wastes | Spent coffee grounds (SCG) | Pyrolysis: Economic study | Eco-social innovation
مقاله انگلیسی
3 ارزیابی سینتیک گاززدایی دی اکسید کربن بر اساس اندازه گیری های غیر همدما و مدلسازی CFD از آنالیزگر گرماسنجی
سال انتشار: 2018 - تعداد صفحات فایل pdf انگلیسی: 12 - تعداد صفحات فایل doc فارسی: 35
هدف از این مطالعه تجزیه و تحلیل کامل از سینتیک فرآیند گاززدایی در جو 〖CO〗_2 بود. ابتدا، پارامترهای سینتیکی بر اساس داده¬های تجربی از اندازه¬گیری گرماسنجی غیرایزوترم (TGA) در سه سرعت گرمایش (20K⁄min ،10 ،3) با استفاده از روش Senum & Yang (SY) تعیین شد. سپس با توجه به کاستی¬های آنالیز گرماسنجی، مدل مبتنی بر CFD سه بعدی برای پیش¬بینی گرمایش و تجزیه نمونه زغال سنگ درون آنالیزگر TG تهیه شد. مدل توافق و سازش خوبی با داده¬های اندازه¬گیری نشان داده است. علاوه بر این، مدلسازی CFD نشان می¬د¬هد که استفاده سرعت گرمایش کمتر در طول آزمایشات TGA ممکن است پارامترهای سینتیکی دقیق¬تری را در مقایسه با اندازه¬گیری¬ها در سرعت گرمایش بالاتر تخمین بزند. این امر به این دلیل است که سرعت گرمایش بیشتر باعث ایجاد گرادیان دمایی بزرگتر در داخل کوره و در نتیجه اختلاف دمای بالاتر بین نمونه ذغال سنگ و دیواره گرمایشی می¬شود ( 11K برای K⁄min 3، 16K برای K⁄min 10، 18K برای K⁄min 20). علاوه بر این، اختلافات در سرعت گرمایش در طول آزمایش تأثیر معنی¬داری در دقت روش SY (خطای حداکثر 20٪) دارد. بنابراین، هنگامی که آزمایش¬های غیرایزوترم انجام می¬شود، روش معکوس (بر اساس انتگرال¬گیری عددی معادله واکنش و الگوریتم لونبرگ-مارکارت) برای تعیین پارامترهای سینتیکی ترجیح داده می¬شود. بدین ترتیب مقادیر انرژی اکتیواسیون که براساس دمای اندازه¬گیری شده (TG) محاسبه می¬شود برای سرعت گرمایش مورد استفاده از 7/253 تا 2/231 کیلوژول بر مول در نظر گرفته شد، در حالی که مقادیر تنظیم شده بر اساس دمای مدل CFD کمی پایین تر یعنی از 8/247 به 6/223 کیلوژول بر مول بود. دومین پارامترهای سینتیکی فاکتور پیش نُمایی نیز با افزایش سرعت گرمایش کاهش می¬یابد و در جایی بالاتر از مقادیر اصلاح شده براساس دمای نمونه مدل محاسبه می¬شود. کمترین اختلاف در پارامترهای سینتیکی محاسبه شده طی اندازه¬گیری در سرعت گرمایش K⁄min 3 مشاهده شد.
واژه‌های کلیدی: TGA | سینتیک گازی سازی CO2 | مدل سازی CFD
مقاله ترجمه شده
4 Ignition of promising coal-water slurry containing petrochemicals: Analysis of key aspects
احتراق امیدوار کننده دوغاب زغال سنگ در آب حاوی مواد پتروشیمی: تجزیه و تحلیل جنبه های کلیدی-2016
An experimental study of the macroscopic laws of the ignition of coal-water slurry containing petrochemicals (CWSPs) based on coal and flammable liquids processing waste is presented. Investigations have been performed to determine the prospects for burning such fuel mixtures prepared from raw materials in power plants at temperatures ranging from minimal (700–800 K) to high (not b 1000 K). Oxidizer flow velocities varied between0.5 and 5 m/s. The study specifies the main stages of the processes at different heating rates and heat flows through a fuel surface element (a droplet or a particle). Investigations have been conducted on a single droplet (radius from 0.25 mm to 1.5 mm) of a specified fuel composition (we have considered over 20 different compo- sitions). With the use of cross-correlation and high-speed video cameras coupled with software applications Tema Automotive, Actual Flow, we have examined the interactions of oxidizer flow with a fuel droplet surface. The ignition delay time and durations up to complete combustion of CWSP droplets have been measured. The experimental results allowed us to elaborate the heat and mass transfer mathematical model including phase transitions and chemical reactions in the main stages of the processes under study, which are: the inert heating up of the sample, the evaporation of moisture from a superficial layer (water and flammable liquid), the thermal decomposition of coal in the superficial layer of a droplet, the mixing of volatiles with an oxidizer, the combustion initiation of the emerging gas mixture, the heating up of coke, and its heterogeneous ignition. From the mathematical model and experimental data, we have defined the necessary and sufficient conditions for the ignition of CWSP.© 2016 Elsevier B.V. All rights reserved.
Keywords: Coal-water slurry containing petrochemicals | Coal and oil processing waste | Waste oil | Flammable liquids | Droplet | Heated air flow | Ignition | Experiment | Simulation
مقاله انگلیسی
5 تأثیرات نرخ گرمایشی و تقویت کننده فلزی روی ریز ساختار و خواص مکانیکی گرادیان نفوذ در خود مواد ابزار کامپوزیتی سرمتی
سال انتشار: 2016 - تعداد صفحات فایل pdf انگلیسی: 14 - تعداد صفحات فایل doc فارسی: 33
گرادیان نفوذ در خود مواد کامپوزیت سرمتی با مقادیر متفاوت از چسب فلزی نیکل ، به نسبت جرمی در ترکیب (کبالت + نیکل ) به منظور بهبود خواص مکانیکی کامپوزیت ها بررسی شد و همچنین تأثیرات نرخ گرمایشی روی ریز ساختار و خواص مکانیکی کامپوزیت ها مورد بررسی قرار گرفت . به منظور عملکرد مطلوب و رسیدن به خواص مکانیکی مورد نظر ، نرخ گرمایشی 30 درجه سانتی گراد بر دقیقه معین شد . و مشخص شد که با افزایش میزان نیکل درمتال بایندر، استحکام کششی افزایش و سختی کاهش می یابد در حالی که افزایش مقدار کبالت باعث ضخیم شدن فاز کناری شده که این امر منجر به کاهش استحکام خمشی مواد کامپوزیتی می شود . با اعمال یک مقدار مناسب از پوشش فلزی نیکل یک شیب نفوذ در خود مطلوب و یک خواص مکانیکی خوب بدست می آید . بهترین خواص مکانیکی در کامپوزیت ها وقتی بدست می آید که چسب فلزی در سطح دارای 6 درصد و درلایه مرکز دارای 12 درصد وزن نیکل باشد . در این حالت استحکام خمشی ، سختی مرکز و سختی سطح به ترتیب 1488±190 Mpa (مگاپاسکال )، 20.96±0.3 Gpa ، 25.12±0.48 Gpa خواهد بود .
کلمات کلیدی: ریزساختار | خواص مکانیکی | نرخ گرمایش | چسب های فلزی | کامپوزیت گرادیان
مقاله ترجمه شده
rss مقالات ترجمه شده rss مقالات انگلیسی rss کتاب های انگلیسی rss مقالات آموزشی
logo-samandehi
بازدید امروز: 2167 :::::::: بازدید دیروز: 0 :::::::: بازدید کل: 2167 :::::::: افراد آنلاین: 61