دانلود و نمایش مقالات مرتبط با Transient simulation::صفحه 1
بلافاصله پس از پرداخت دانلود کنید

با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد). 

نتیجه جستجو - Transient simulation

تعداد مقالات یافته شده: 5
ردیف عنوان نوع
1 Adaptive finite element eye model for the compensation of biometric influences on acoustic tonometry
مدل چشم اجزای محدود تطبیقی برای جبران تأثیرات بیومتریک بر تونومتری آکوستیک-2021
Background and objective: Glaucoma is currently a major cause for irreversible blindness worldwide. A risk factor and the only therapeutic control parameter is the intraocular pressure (IOP). The IOP is determined with tonometers, whose measurements are inevitably influenced by the geometry of the eye. Even though the corneal mechanics have been investigated to improve accuracy of Goldmann and air pulse tonometry, influences of geometric properties of the eye on an acoustic self-tonometer approach are still unresolved.
Methods: In order to understand and compensate for measurement deviations resulting from the geometric uniqueness of eyes, a finite element eye model is designed that considers all relevant eye components and is adjustable to all physiological shapes of the human eye.
Results: The general IOP-dependent behavior of the eye model is validated by laboratory measurements on porcine eyes. The difference between simulation and measurement is below 8 μm for IOP levels from 5 to 40 mmHg. The adaptive eye model is then used to quantify systematic uncertainty contributions of a variation of eye length and central corneal thickness based on input statistics of a clinical trial series. The adaptive eye model provides the required relation between biometric eye parameters and the corneal deflection amplitude, which here is the measured quantity to trace back to the IOP. Implementing the relations provided by the eye model in a Gaussian uncertainty propagation calculation now allows the quantification of the uncertainty contributions of the biometric parameters on the overall measurement uncertainty of the acoustic self-tonometer. As a result, a systematic uncertainty contribution resulting from deviations in eye length dominate stochastic deviations of the sensor equipment by a factor of 3.5.
Conclusion: As perspective, the proposed adaptive eye model provides the basis to compensate for systematic deviations of (but not only) the acoustic self-tonometer.
Keywords: Corneal vibration | Transient simulation | FEM | Eye model | Intraocular pressure | Glaucoma
مقاله انگلیسی
2 RESTART vs Splitting: A comparative study
شروع دوباره در برابر بخش بندی: یک مطالعه مقایسه ای-2018
Importance Sampling and RESTART/Splitting are the two main groups of methods for rare event simulation. The second of these groups is increasingly used in a variety of fields, sometimes receiving different names, such as Subset Simulation or Forward Flux Sampling. In both RESTART and Splitting a number of retrials (or paths) are made when the process reaches certain thresholds of a function of the system state, called the importance function. In RESTART all but one path are cut when they down-cross the threshold where they were generated and a new set of retrials is made if the trial that continues up-crosses that threshold. In Splitting, all the paths continue until the end-of-simulation condition is fulfilled but retrials are not performed if one of these trials up-crosses the threshold where the trial was generated. In the adaptive versions of Splitting or RESTART (introduced in this paper) the thresholds are not defined beforehand. No simulation study has been made to compare both methods, while only one very limited comparative study was made for transient simulation between two truncation variants of Splitting and RESTART. In the truncation variant of Splitting all the simulation paths are cut if they drop several thresholds below the threshold at which they were generated. In the truncation version of RESTART, that we have called RESTART with prolonged retrials, all but one path are cut when they drop several thresholds and a new set of retrials is made if the trial that continues up-crosses the threshold where it was generated. In this paper the comparative study is made for both transient and steady-state simulations. Both original methods and also their truncation versions with different depths of truncation are compared. The models used for the study include several Jackson and non-Jackson networks and also a general model of reliability with different types of components. The main conclusion of the study is that RESTART always behaves significantly better than Splitting. Another finding of this paper is that an additional gain (up to more than 50%) is achieved with RESTART with prolonged retrials of depths 1 or 2 in models where many thresholds can be set.
keywords: Variance reduction |Rare event |RESTART/splitting simulation |Queueing networks |System reliability
مقاله انگلیسی
3 Experimental evaluation and transient simulation of detergent transport in household vertical axis washing machines
ارزیابی تجربی و شبیه سازی گذرای حمل و نقل مواد شوینده خانگی عمودی ماشین لباسشویی-2016
Detergent transport between the compartments and through the garments during the washing process in household top-load washing machines is investigated. An experimental methodology was put forward for evaluating the time evolution of the detergent concentration in each compartment, and also in a probe enveloped by a cotton-linen that emulates the garments. The experiments were carried out following a full factorial experiment, pointing out the detergent insertion location and the agitation speed as the rate-determining factors. A lumped transient model was put forward for the convective transport of detergent. The set of ODEs was solved numerically through an adaptive time-step algorithm. The closing parameters required by the model were reduced from the experimental data, thus providing the model with a semi-empirical character. The model predictions for the time evolution of the detergent concentration and the experimental data agreed to within the range of the measurement uncertainties (∼15%).
Keywords: Mass transfer | Experimental analysis | Transient simulation | Detergent transport | Washing machine
مقاله انگلیسی
4 مدل حوزه فاز ماشین همگام با ماتریس هدایت معادل ثابت برای پاسخ نوع EMTP
سال انتشار: 2013 - تعداد صفحات فایل pdf انگلیسی: 12 - تعداد صفحات فایل doc فارسی: 25
مدل‌های ماشین واسط در تحلیل گرهی (همانند EMTP) یا برنامه‌های شبیه سازی گذرای بر مبنای متغیر حالت نقش مهمی‌را در دقت عددی و کارایی محاسباتی کل شبیه سازی ایفا می‌کند. به عنوان یک جایگزین سودمند برای مدل سنتی qd، جدیدا چندین مدل ماشین حوزه فاز پیشرفته (PD) و رآکتانس-پشت-ولتاژ معرفی شده است. با این حال، ماتریس هدایت وابسته به جایگاه روتور در ماشین- شبکه رابط استفاده از چنین مدل‌هایی را در EMTP را پیچیده می‌کند. این مقاله بر بدست آوردن مدل مدار واسط موثر و ثابت برای ماشین سنکرون PD تمرکز دارد. نشان داده شده است که ماتریس هدایت ماشین می‌تواند در یک زیر ماتریس ثابت بعلاوه یک زیر ماتریس متغیر با زمان فرموله شود. حذف برجستگی عددی از روابط دوم منجر به یک ماتریس هدایت ثابت مدل PD پیشنهادی می‌شود، که ویژگی بسیار مطلوبی برای حل EMTP به دلیل اجتاب از بازفاکتورگیری ماتریس هدایت شبکه در هر مرحله زمانی است. مطالعات موردی ثابت کرده است که مدل PD پیشنهاد شده در ضمن حفظ دقت مدل PD اصل/سنتی یک پیشرفت مهم نسبت به مدل‌های دیگر تثبیت شده که در EMTP استفاده می‌شوند، است.
کلمات کلیدی: ماتریس هدایت ثابت | EMTP | ماتریس G | مدل حوزه فاز (PD) | مدل qd | حذف برجستگی | ماشین سنکرون | مدل ولتاژ- پشت- رآکتانس (VBR)
مقاله ترجمه شده
5 کنترل توربین بادی ژنراتور القايي از دو سو تغذيه با استفاده از کنترل مستقیم بردار جریان
سال انتشار: 2012 - تعداد صفحات فایل pdf انگلیسی: 11 - تعداد صفحات فایل doc فارسی: 27
توربين بادي ژنراتور القايي از دو سو تغذيه (DFIG) يك توربين بادي سرعت متغير است كه بطور گسترده اي امروزه در صنعت مدرن توان باد مورد استفاده قرار مي گيرد. در حال حاضر توربينهاي بادي DFIG تجاري با فن آوري كه در يك دهه قبل توسعه يافته اند مورد استفاده قرار میگیرند. اما در اين مقاله نشان خواهد داد كه يك محدوديت در روش كنترل برداري مرسوم وجود دارد. اين مقاله يك روش كنترل مستقيم بردار جريان در يك توربين بادي DFIG ارائه مي دهد بر اساس يك استراتژي كنترل يكپارچه براي گسترش استخراج انرژي باد، توان راكتيو و پشتيباني از ولتاژ شبكه توربين بادي مي باشد. يك سيستم شبيه سازي گذرا با استفاده از شبيه سازي سيستم قدرت براي تاثير روش پيشنهادي انجام شده است. روش كنترل مرسوم با روش كنترل پيشنهادي براي كنترل توربين بادي DFIG تحت هر دو شرايط وزش شديد باد و ثابت بودن باد مقايسه شده است. اين مقاله نشان خواهد داد كه تحت كنترل مستقيم برادار جريان سيستم DFIG يك عملكرد برتر در ابعاد مختلف خواهد داشت.
كلمات كليدي: كنترل ولتاژ لينك dc | كنترل مستقيم بردار جريان | ژنراتور القايي دو سو تغذيه | توربين بادي | كنترل پشتيبان ولتاژ شبكه | استخراج حداكثر توان | كنترل توان راكتيو.
مقاله ترجمه شده
rss مقالات ترجمه شده rss مقالات انگلیسی rss کتاب های انگلیسی rss مقالات آموزشی
logo-samandehi
بازدید امروز: 3022 :::::::: بازدید دیروز: 0 :::::::: بازدید کل: 3022 :::::::: افراد آنلاین: 71