با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد).
ردیف | عنوان | نوع |
---|---|---|
1 |
Total fractional-order variation regularization based image reconstruction method for capacitively coupled electrical resistance tomography
روش بازسازی تصویر مبتنی بر تنظیم تغییرات مرتبه کسری کل برای توموگرافی مقاومت الکتریکی جفت شده خازنی-2021 Compared with electrical resistance tomography, capacitively coupled electrical resistance tomography (CCERT)
is preferred since it avoids problems of electrode corrosion and electrode polarization. However, reconstruction
of conductivity distribution is still a great challenge for CCERT. To improve reconstruction quality, this work
proposes a novel image reconstruction method based on total fractional-order variation regularization. Simulation work is conducted and reconstruction of several typical models is studied. Robustness of the proposed
method to noise is also conducted. Additionally, the performance of the proposed reconstruction method is
quantitatively evaluated. We have also carried out phantom experiment to further verify the effectiveness of the
proposed method. The results demonstrate that the quality of reconstruction has been largely improved when
compared with the images reconstructed by Land weber, Newton-Raphson and Tikhonov methods. The inclusion
is more accurately reconstructed and the background is much clearer even under the impact of noise.
Keywords: Capacitively coupled electrical resistance | tomography | Image reconstruction | Total fractional-order variation regularization |
مقاله انگلیسی |
2 |
Comparative study on the annual performance between loop thermosyphon solar water heating system and conventional solar water heating system
بررسی مقایسه ای عملکرد سالانه بین سیستم گرمایش آب خورشیدی حلقه ترموسیفون و سیستم گرمایش آب خورشیدی معمولی-2020 Loop thermosyphon (LT) is usually introduced to overcome the freezing and corrosion problems associated with
the conventional solar water heating (SWH) system. Compared with the conventional SWH system, the LT-SWH
system possesses a lower nighttime heat loss because of the thermal diode property of loop thermpsyphon but
bigger daytime heat loss because of the secondary heat exchange. However, the effect of above interaction to the
system performance is rarely reported based on long-term running. In this study, based on the typical meteorological
year data of Fuzhou city, annual performances of above two systems, including the effective number of
supplying days, effective heat gain and nighttime heat loss, are comparatively analyzed under two different
operational modes. Variations of above mentioned variables with the increment in the set temperature are
discussed. The results indicate that, under the discontinuous heating mode, the effective numbers of supplying
days of SWH system and LT-SWH system are 139 and 153, respectively. While the numbers of days are respectively
168 and 173 under the continuous heating mode. The SWH system possesses an expected bigger
nighttime heat loss ratio with an average annual value of 15.07% corresponding to 6.15% for the LT-SWH
system. Particularly, for the LT-SWH system, the different relative magnitudes of heat loss coefficients functioning
at different times leads to a smaller temperature drop at night and also a smaller temperature rise at the
subsequent day. It generates an unanticipated results that corresponds to the same month from November to
April, the two systems have the approximate effective heat gain. The set temperature significantly influences the
relative magnitudes of annual effective number of supplying days and annual effective heat gain, the superiority
of LT-SWH system gradually diminishes and even reverses with the increment in the set temperature. The bigger
daytime heat loss dominating the dominance is responsible for that transition. Combining with a longer static
payback period, it is conditional to substitute the conventional SWH system with the LT-SWH system, especially
when the water temperature on demand is high. Keywords: Solar water heating system | Loop thermosyphon solar water heating system | Typical meteorological year | Effective heat gain | Nighttime heat loss |
مقاله انگلیسی |
3 |
Serial number restoration on polymer surfaces: A survey of recent literature
ترمیم شماره سریال روی سطوح پلیمر: بررسی ادبیات اخیر-2020 Polymers are increasingly preferred for the production of weapon parts due to their lightness, resistance to
corrosion, heat tolerance and quite reasonable production cost. This increase will likely lead to a rise in the
obliteration of serial numbers, which are imprinted on the polymer components of vehicles and firearms.
However, compared to metals, the recovery process and the restoration procedures do not seem to be well
documented for polymers. Since serial numbers, together with the proof marks and wording related to the brand,
model, caliber or manufacturer information, can be regarded as unique in identifying and tracing the vehicles
and firearms, the restoration of these alphanumeric codes is vital in determining the items’ origin and owner.
Best to our knowledge this is the first review examining the conventional and the recently developed serial
number restoration techniques applied on polymer surfaces. This review endeavoured to examine the empirical
studies related to serial number restoration on polymers both to demonstrate the scope and evolution of restoration
efforts and to give insight into the mechanisms of revisualization and the impact of polymer composition
on numbering, obliteration and restoration. The findings indicate that parameters like polymer type,
numbering style, obliteration method and techniques used in the restoration process affect the recovery. The
findings also suggest that there is an increase in the number of studies applying non-destructive screening
techniques for restoration purposes. This review contributes to the literature by outlining the empirical studies
and proposing likely avenues for prospective research on restoration techniques which are importantboth for the
forensic marks examination and criminal investigations. Keywords: Polymer | Metal | Serial number | Obliteration | Restoration |
مقاله انگلیسی |
4 |
A fuzzy expert system for mitigation of risks and effective control of gas pressure reduction stations with a real application
یک سیستم خبره فازی برای کاهش خطرات و کنترل مؤثر ایستگاه های کاهش فشار گاز با کاربرد واقعی-2019 Environmental changes and increased uncertainty due to technical damage, explosions and large fires have
caused the risk of an inevitable element in the gas industry. This study purposes developing a new hybrid fuzzy
expert system as a decision support system to mitigate the risk associated with gas transmission stations. The
designed knowledge-based system combines the procedural and descriptive rules based on experts’ judgments to
analyze the complex relationships between the different components of a gas pressure reduction station. The
developed fuzzy expert system is coded in C language integrated production system (CLIPS) and is linked with
MATLAB software for calling fuzzy functions. A real case study of gas pressure reduction stations in Iranian gas
industry is conducted to validate the proposed expert system model. The expert system provides more than one
thousand rules based on expert knowledge to prevent the pressure drop and the quality loss of gas or shutting off
gas flow which accordingly increases gas flow stability. The proposed expert system could minimize the risk of
hazardous scenarios, such as leakage and corrosion, in the gas industry and provide an acceptable precision in
the provision of periodic control strategies and appropriate response under an emergency condition. Keywords: Expert systems | Gas city stations | Decision support | Fuzzy variables | Gas pressure |
مقاله انگلیسی |
5 |
Subsurface damage detection of a steel bridge using deep learning and uncooled micro-bolometer
تشخیص آسیب زیرسطحی یک پل فولادی با استفاده از یادگیری عمیق و میکروبولومتر غیر مسطح-2019 A new deep learning-based method is proposed to detect subsurface damage of steel members in a steel
truss bridge using infrared thermography (IRT). To reduce computation costs, the original deep inception
neural network (DINN) is modified for transfer learning. The proposed method provides bounding boxes
for detecting and localizing subsurface damage such as corrosion and debonding between paint with
coating and steel surface. Robustness and accuracy were tested on 200 thermal images (640 480 pixels),
and 96% accuracy and 97.79% specificity was achieved. The results were validated with ultrasonic
pulse velocity (UPV) tests. Keywords: Infrared thermography | Damage detection | Deep learning | Subsurface damage | Bridge | Non-destructive evaluation | Steel structure |
مقاله انگلیسی |
6 |
داده های مربوط به خورندگي آب در منابع و شبکه توزیع آب آشامیدنی در شمال ایران
سال انتشار: 2018 - تعداد صفحات فایل pdf انگلیسی: 14 - تعداد صفحات فایل doc فارسی: 17 اين مطالعه با هدف تعيين پارامترهاي مقیاس پذیری و پتانسيل خورندگي آب آشاميدني در منابع و شبكه هاي توزيع آب در دو شهر شمال ايران انجام شد. نتایج حاصل از آنالیز املاح آب املش(شهر) در فصل زمستان نشان داد که میانگین مقادیر شاخص های Langelier، Ryznar، Aggressive، Pockorius و Larson-skold به ترتیب -1.31، 7.93، 11.5، 74.9.7 و 0.24، اما در تابستان آنها 1.51-، 10.71، 11.36، 10.72 و 0.25بدست آمد. نتایج آنالیز نمونه های آب در فصل زمستان در رودسر، نشان داد که میانگین مقادیر Langelier، Ryznar، Aggressive، Pockorius و Larson به ترتیب 1.12-، 69.9، 11.33، 19.19 و 0.16 ، در حالی که در تابستان به ترتیب 1.05-، 10.04، 11.92، 18.10 و 0.19بدست آمد. داده ها، تصویری روشن از کیفیت آب آشامیدنی را نشان می دهند و برای پیشگیری از مشکلات اقتصادی و ایمنی مرتبط با خوردگی و مقیاس آب آشامیدنی مفید هستند.
واژه های کلیدی : آب آشامیدنی | خوردگی آب | پتانسیل مقیاس | املش | رودسر |
مقاله ترجمه شده |
7 |
داده های مربوط به قابلیت خوردگي و مقیاس پذیری منابع آب آشامیدنی با استفاده از شاخص های پایداری در جلفا، آذربایجان شرقی، ایران
سال انتشار: 2018 - تعداد صفحات فایل pdf انگلیسی: 8 - تعداد صفحات فایل doc فارسی: 10 این مطالعه مقطعی بر روی منابع آب آشامیدنی شهر جلفا (استان آذربایجان شرقی ایران) با نمونه برداری از 30 چاه انجام شد. سختی، کلسیم، pH، قلیاییت کل ، TDS، دما و سایر پارامترهای شیمیایی با استفاده از روش های استاندارد اندازه گیری شد. . شاخص اشباع لانژليه (LSI)، شاخص پایداری ريزنار (RSI)، شاخص مقباس پذیری (PSI) پوكوريوس ، شاخص لارسون-اسكولد(LS) و شاخص (AI)شدت خوردگي محاسبه شد و نتایج نشان داد که شاخص های شاخص اشباع LSI ، شاخص پایداری RSI ، شاخص مقباس پذیری PSI ، شاخص LS و شاخص AI به ترتیب 1.15 ( 7.43 ± )، 6.92 ( 0.54 ± )، 6.42 (0.97 ± )، 0.85 (0.72 ± ) و 7.97 (7.47 ± ) بدست آمد. از لحاظ طبقه بندی آب، 30 درصد از نمونه ها در دسته NaCl و 6/26 درصد در دسته NaHCO3 و 43.4 درصد نمونه ها در دسته CaHCO3، MgHCO3 و MgCl قرار گرفتند. شاخص های رسوب نشان داد که آب چاه ها می تواند خورنده درنظر گرفته شود.
کلید واژه : پتانسیل خوردگي و مقیاس پذیری | شاخص های پایداری | آب زیرزمینی | جلفا |
مقاله ترجمه شده |
8 |
داده هاي مربوط به کيفيت آب زيرزميني، پتانسيل مقياس پذیری و خوردگي نمونه هاي آبي در منابع آب آشاميدني مناطق روستايی تربت حيدريه استان خراسان رضوي
سال انتشار: 2018 - تعداد صفحات فایل pdf انگلیسی: 7 - تعداد صفحات فایل doc فارسی: 10 بر اساس دستورالعمل سازمان بهداشت جهانی، کنترل خورندگی یکی از جنبه های مهم تامین آب آشامیدنی است. داده های ارائه شده، پارامترهای فیزیکی و شیمیایی آب آشامیدنی در مناطق روستایی شهرستان تربت حیدریه است و برای تعیین شاخص های خورندگی کاربرد دارد. این مطالعه مقطعی با 188 نمونه در سال 2014 و 13 پارامتر آنالیز شده بر اساس روش استاندارد، انجام شد. همچنین نتیجه این مقاله با استانداردهای آژانس حفاظت محیط زیست و استانداردهای ملی ایران مقایسه شد. پنج شاخص: شاخص اشباع لانژليه (LSI)، شاخص پایداری ريزنار (RSI)، شاخص مقباس پذیری (PSI) پوكوريوس ، شاخص لارسون-اسكولد(LS) و شاخص (AI)شدت خوردگي ، با استفاده از نرم افزار Microsoft Excelکد نویسی شد و این نرم افزار به دلیل سادگی ، به راحتی می تواند توسط محققان و اپراتورها مورد استفاده قرار گیرد. پارامترهای شامل سولفات، سدیم، کلرید و هدایت الکتریکی به ترتیب 13.5٪، 28٪، 10.5٪ و 15٪ بیشتر از سطح استاندارد بود. مقدار نیترات در 98٪ موارد در حد مجاز و حدود 2٪ بیشتر از سطح استاندارد بود. نتايج نشان داد که LSI، RSI، PSI، LS و AI، به ترتیب طبق شاخص ها 6/6 درصد، 4/89 درصد، 2/87 درصد، 6/60 درصد و 9/14 درصد منابع آب آشاميدني خورنده است.
کليدواژه: آب آشاميدني | روستاهاي شهر تربت حيدريه | شاخص پایداری |
مقاله ترجمه شده |
9 |
پیش بینی شاخص های پایداری و نسبت جذب سدیم در منابع آب آشامیدنی رودخانه لردگان در غرب ایران با استفاده از سیستم استنتاج عصبی فازی
سال انتشار: 2018 - تعداد صفحات فایل pdf انگلیسی: 7 - تعداد صفحات فایل doc فارسی: 11 بر اساس دستورالعمل سازمان بهداشت جهانی، کنترل خوردگی یکی از جنبه های مهم تامین آب آشامیدنی است. آب معمولا شامل مواد تشکیل دهنده، گازهای حل شده و مواد معلق است. اگر چه برخی از این مواد آب برای انسان ضروری است، ولی مقدار بیش از حد مجاز این عناصر ، می توانند سلامت انسان را به خطر بیندازند. هدف از این مطالعه ارزیابی پارامترهای فیزیکی و شیمیایی آب آشامیدنی در مناطق روستایی شهرستان لردگان، همچنین تعیین شاخص های خوردگی است. این مطالعه مقطعی در سال 2017 با 141 نمونه و 13 پارامتر انجام شده است که براساس روش استاندارد و برای ارزیابی شاخص های کیفیت آب آبهای زیرزمینی با استفاده از ANFIS انجام شد. همچنین نتایج این مقاله با استانداردهای آژانس حفاظت محیط زیست و استانداردهای ملی ایران مقایسه شده است. پنج شاخص، شاخص اشباع لانژليه (LSI)، شاخص پایداری ريزنار (RSI)، شاخص مقیاس پذیری پوكوريوس (PSI) ، شاخص لارسون-اسكولد(LS) و شاخص شدت خوردگي(AI) با استفاده از نرم افزار مایکروسافت اکسل محاسبه شد. با توجه به سادگی نرم افزار، این نرم افزار به راحتی توسط محققان و اپراتورها مورد استفاده قرار می گیرد. پارامترهایی چون سولفات، سدیم، کلرید و هدایت الکتریکی به ترتیب 13.5، 28، 10.5 و 15 درصد بیشتر از سطح استاندارد بود. مقدار نیترات در 98٪ موارد بیش از حد مجاز و حدود 2٪ بیشتر از سطح استاندارد بود. نتايج حاصل از تحقيق حاضر نشان مي دهد که طبق LSI، RSI، PSI، LS و AI، آب در 6/6 درصد، 4/89 درصد، 2/87 درصد، 6/60 درصد و 9/14 درصد مخازن آب آشاميدني خورنده است.
کليدواژه: آب آشاميدني | روستاهاي شهر لردگان | شاخص ثبات |
مقاله ترجمه شده |
10 |
Data mining to online galvanic current of zinc/copper
داده کاوی به جریان گالوانیزیکی آنلاین روی / مس-2018 The galvanic current of a zinc/copper atmospheric corrosion monitor exposed to outdoor conditions is analysed
to evaluate the corrosivity of the atmospheric environment. It is essential to develop effective and efficient
models for the monitored corrosion current in order to uncover the underlying mechanism of the corrosion
process. In this paper, we propose a new variable, the corrosion index, to quantify the corrosivity of the at
mospheric environment. The time series of galvanic current is treated statistically to predict the corrosion index
via a hidden Markov model. The prediction model performs favourably on the online corrosion data in terms of
efficiency and accuracy.
Keywords: Galvanic current ، Corrosion index ، Hidden Markov model ، Atmospheric corrosion |
مقاله انگلیسی |