دانلود و نمایش مقالات مرتبط با سایش ابزار::صفحه 1
دانلود بهترین مقالات isi همراه با ترجمه فارسی 2

با سلام خدمت کاربران در صورتی که با خطای سیستم پرداخت بانکی مواجه شدید از طریق کارت به کارت (6037997535328901 بانک ملی ناصر خنجری ) مقاله خود را دریافت کنید (تا مشکل رفع گردد). 

نتیجه جستجو - سایش ابزار

تعداد مقالات یافته شده: 3
ردیف عنوان نوع
1 Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method
تاثیر شرایط سیال برش و پارامترهای برش بر زبری سطح و ابزار لباس در فرایند تبدیل با استفاده از روش تاگوچی-2016
In this experimental work, the effect of various cutting fluid levels and cutting parameters on surface roughness and tool wear was studied. Taguchi orthogonal array was employed to minimize the number of experiments. The experiments were carried out on mild steel bar using a TiCN + Al2O3 + TiN coated carbide tool insert in the CNC turning process. The effect of feed rate was found to be the dominant factor contributing 34.3% to surface roughness of the work-piece. The flow rate of the cutting fluid also showed a significant contribution (33.1%). However, cutting speed and depth of cut showed little contribution to surface roughness. On the other hand, cutting speed (43.1%) and depth of cut (35.8%) were the dominant factors influencing tool wear. However, application of cutting fluid (13.7%) showed a considerable contribution, while the feed rate gave the least contribution to tool wear. The optimum cutting conditions for desired surface roughness and tool wear were at a high level of cutting speed, medium level of depth of cut, low level of feed rate and lowflow high-velocity (LFHV) cutting fluid flow from the selected levels.
Keywords: Cutting fluid | Cutting parameters | Surface roughness | Tool wear | Taguchi method
مقاله انگلیسی
2 Performance of coated and uncoated mixed ceramic tools in hard turning process
عملکرد ابزار سرامیک مخلوط پوششدار و بدون پوشش در فرایند تبدیل سخت-2016
The present contribution deals with the study of the effects of cutting speed, feed rate and depth of cut on the performance of machining which traditionally named ‘‘machinability”. The focus is made on the effect of the pre-cited cutting parameters on the evolution of sur- face roughness and cutting force components during hard turning of AISI D3 cold work tool steel with CC6050 and CC650 ceramic inserts. Also, for both ceramics a comparison of theirwear evolution with time and its impact on the surface equality was proposed. The plan-Keywords:Hard turningning of experiments was based on Taguchi’s L16orthogonal array. The analysis of varianceSurface roughness Cutting forceTool wear Taguchi method RSM(ANOVA), the signal-to-noise ratio and response surface methodology (RSM) were adopted.Consequently, the validity of proposed linear regression model was checked and the most important parameter affecting the surface roughness and cutting force components were determined. Furthermore, in order to determine the levels of the cutting regime that lead to minimum surface roughness and minimum machining force the relationship between cutting factors was analyzed. The results revealed that the surface quality obtained with the coated CC6050 ceramic insert is 1.6 times better than the one obtained with uncoated CC650 ceramic insert. However, the uncoated ceramic insert was useful in reducing the machining force.© 2015 Elsevier Ltd. All rights reserved.
Keywords: Hard turning | Surface roughness | Cutting force | Tool wear | Taguchi method | RSM
مقاله انگلیسی
3 شبیه سازی رفتار دیفوزیونی دینامیک ملکول کبالت و تیتانیم واثراتشان بروی سایش ابزارهای WC/CO هنگامی که آلیاژهای Ti ماشینکار شده
سال انتشار: 2016 - تعداد صفحات فایل pdf انگلیسی: 10 - تعداد صفحات فایل doc فارسی: 28
در پروسه ماشینکاری آلیاژهای تیتانیم به علت سایش ابزار در فصل مشترک تراشه / ابزار در دماهای بالا وتنش شدید، امکان فعالیت نفوذ اتمی وجود دارد. در این مقاله گرما و تنش در فصل مشترک با شبیه سازی المان محدود بررسی و مطالعه رفتار دیفوزیونی فصل مشترک تیتانیم/ کبالت در مقیاس اتمی جهت شبیه سازی دینامیک ملکولی مورد استفاده قرار گرفت. نتایج نشان میدهد، سرعت برشکاری اعمالی بطور برجسته ای نقش مهمی در دیفوزیون فصل مشترک تیتانیم کبالت داشته و نفوذ اتمی در راستای فصل مشترک با افزایش سرعت برشکاری و بالاترین سرعت برشکاری مطابق با ضخیم ترین لایه نفوذ، بیشترین اهمیت را دارد. ناحیه فصل مشترک به صورت یک ساختار آمورف منظم در بالاترین سرعت برشکاری نمایش داده شد، که نفوذ اتم تیتانیم به سمت اتم کبالت متناسب با بزرگترین فاصله میان اتم های کبالت ، آسان تر بود. آنالیز براساس عنصر دیفوزیونی، بر روی عمق پروفیل بوسیله طیف سنجی الکترونی اوژه انجام شد. نتایج شبیه سازی از راه آزمایش بوسیله انجام آزمون های تراشکاری تایید شد و مکانیزم میکروسکوپی سایش دیفوزیونی از ابزار مشخص شد، که این مطالعه از عوامل درک بهتر مکانیزم سایش ابزارها برش در ماشینکاری آلیاژهای تیتانیم میباشد.
کلیدواژه ها: دینامیک مولکولی | نفوذ | سطوح | ابزار برش
مقاله ترجمه شده
rss مقالات ترجمه شده rss مقالات انگلیسی rss کتاب های انگلیسی rss مقالات آموزشی
logo-samandehi
بازدید امروز: 2129 :::::::: بازدید دیروز: 0 :::::::: بازدید کل: 2129 :::::::: افراد آنلاین: 56